Installing a Brick Paver Walkway or Brick Patio Installation

The use of Bricks or Pavers to create a walkway or patio area matches a home in a method that is unmatched. In addition, installing a Brick or Paver walkway does not always require a pro.

The secret to installing a Brick or Paver Walkway is to very first appropriately prepare the area where the bricks/pavers are to be installed. In addition, string lines need to be strung on each side of the pathway.
When the location has actually been dug down, 3/4" gravel stone should be laid in and tamped down firmly. The height in between the tamped down sand and the stringline should equal the thickness of the brick or paver.

Now that you have a steady base, position a 1" pipe or ledger board the length of the pathway on either side of the pathway. Then utilizing a flatedge, e.g. a 2"x4" board, slide it over the two lengths of the pipe/ledger board. In doing this you will produce a level surface location to lay the bricks/pavers.

Now location on the level sand/stone dust strips of plastic brick borders. Set up a run on both sides of the ready location. These strips will act as your sidewalk border and aid to keep the stability and shape of the walkway.

The key to laying the bricks/pavers is to ensure that they interlock with each other. Constantly stagger surrounding rows here of bricks by 1/2 of a brick to interlock them. This will once again help maintain the stability of the pathway.

Inevitably bricks/pavers will require to be cut or split when constructing the pathway. To actually cut/split the brick/paver, lay it in a bed of sand and place the sculpt at a 75 degree angle over the spot where you desire to break the brick. If your pathway has curves you will require to buy/rent a wetsaw.

After installing the bricks, construct up the outside edges with extra sand, and then shovel in the topsoil and load down securely.
Lastly, spread stone dust over the new sidewalk and sweep into the cracks. Repeat this procedure a couple of times to make sure the cracks are totally filled. This will complete the interlocking of the bricks and help to remove any weed growth. Just include grass seed to the outdoors edges read more and you should have a beautiful entrance to your house within a number of weeks.


In addition, installing a Brick or Paver walkway does not always require a pro. The key to setting up a Brick or Paver Walkway is to first appropriately prepare the location where the bricks/pavers are to be set up. Now that you have a steady base, put a 1" pipeline or journal board the length of the walkway on either side of the walkway. These strips will act as your pathway border and aid to maintain the stability and shape of the walkway. Inevitably bricks/pavers will need to be cut or divided when building the walkway.

Leave a Reply

Your email address will not be published. Required fields are marked *